Home » AEMC MF 300-6-2-10 HF MiniFlex Current Probe (2126.83)
AEMC MF 300-6-2-10 HF MiniFlex Current Probe (2126.83)
Part Number:
AEMC MF 300-6-2-10 HF
In Stock?
Stock may be available
please call (877)766-5412 to confirm
please call (877)766-5412 to confirm
Quantity
Price:
$569.00 
USD (change)
USD (change) 
The AEMC MF 300-6-2-10 HF MiniFlex Current Probe is a high frequency compact flexible AC current measurement device composed of a flexible sensor and an electronic module. It is designed to measure AC Current from 5Hz to 1MHz. The flexible sensor permits measurements on conductors where standard clamp-on probes could not be used. In particular, it can be installed in confined spaces, places where access is difficult, or even wrapped around irregular shapes. The flexible sensor is available in lengths of 6" (MF 300-6-2-10) and 10" (MF 300-10-2-10).
Applications
- Power measurements
- Measurements on thyristors and SCRs
- Switching measurements (disconnecting switch, etc.)
- Measurements on switchgear
- Control signals
The Good:
The Bad:
The Bottom Line:
The Bad:
The Bottom Line:
Full Review
- Measures from 0.5Arms to 300Arms
- Accuracy 1% of Reading ± 0.3A
- TRMS measurements when connected to a TRMS instrument
- No core saturation or damage if overloaded
- 9V battery for typical 140 hour continuous operation
- 1MHz frequency response
- Low phase shift for power measurements
- Insensitive to DC, measures only AC component on DC + AC signals
- Excellent linearity
- Lightweight
- Sensor is resistant to oils and aliphatic hydrocarbons
- EN 61010; 1000V CAT III; 600V CAT IV; CE Mark
| MODEL | ||
| MF 300-6-2-10-HF | MF 300-10-2-10-HF | |
| ELECTRICAL | ||
| Range | 30/300A | |
| Signal Output | 100mV/10mV/A | |
| Frequency Range | 5 to 1MHz @ -3db | |
| Influence Of Conductor Positioning | 1.5% typical, 3% max | |
| Influence Of Conductor Positioning In Sensor Against Handle | 4% typical, 6% max | |
| External Conductor Influence | 35dB to 40dB on contact | |
| Power Source | 9V Alkaline battery (6LF22) | |
| MECHANICAL | ||
| Sensor Diameter | 5mm Ø (vs 12.5 for AmpFlex) | |
| Sensor Length | 6" (152mm) | 10" (250mm) |
| Max Conductor Size | 1.77" (45mm) | 2.95" (74.9mm) |
| Connection Cable Length | 6.5 ft (2m) | |
| Drop Test | Per IEC 68-2-32 | |
| Vibration | Per IEC 68-2-6 | |
| Mechanical Shock | Per IEC 68-2-27 | |
| Weatherproofing | IP 50 | |
| ENVIRONMENTAL | ||
| Operating Temperature Range | 14° to 131°F (-10° to +55°C) | |
| Storage Temperature Range | -40° to 158°F (-40° to +70°C) | |
| Altitude | Operating: 0 to 2000m, working voltage derating above; Non-operating: 0 to 12,000m | |
| SAFETY | ||
| Safety Rating | EN 61010, 1000V CAT III; 600V CAT IV | |
No user reviews available.
