Home » AEMC 6472 Multi-Function Ground Resistance Tester

AEMC 6472 Multi-Function Ground Resistance Tester

AEMC 6472 Multi-Function Ground Resistance Tester
Part Number:
AEMC 6472
In Stock?
Stock may be available
please call (877)766-5412 to confirm

Quantity

Price:
$3795.00 USD (change)

 

The AEMC 6472 Multi-Function Digital Ground Resistance Tester is a portable measurement instrument designed to measure Bond Resistance, Ground Resistance (with and without clamps), Soil Resistivity, Earth Coupling, Step & Touch Potential.

When used in combination with the AEMC 6474 GroundFlex Adapter (factory supplied product only), Power Transmission Tower and Tower Leg Ground Resistance testing is also available.

The AEMC 6472 measures from 0.01 to 99.99kΩ and is auto-ranging, automatically seeking out the optimum measurement range, test frequency and test current. The adjustable test frequency (either manual or automatic) from 40 to 5078Hz test voltage provides rejection of high levels of interference, allowing it to be used under difficult conditions such as the presence of high stray currents that normally affect accuracy.
Up to 512 test results can be stored in internal memory for later recall to the display or downloaded to a PC using DataView® software (included) for Automatic Report Generation, Automatic Fall-of-Potential Plot Generation, Frequency/Resistance Plots and much more.

Applications:

  • 3-Point measurements of resistance to ground of ground rods and grids. 3-Point measurements are used when electrode or grid can be easily disconnected.
  • 4-Point tests or soil resistivity measurements. Locating areas of lowest soil resistivity is essential for achieving an economical grounding installation.
  • Touch and step potential testing measurements. These tests are recommended when the ground cannot be disconnected, where ground faults are highly likely to occur, or when the “footprint” of grounded equipment (the outline of the part of equipment in contact with earth) is comparable to the size of the ground to be tested.
  • 2- or 4-Wire tests for continuity tests on bonding or on grounding systems. Test is a DC resistive test using 250mA or more and is used to check bonding of all connection points on the ground system.
  • Earth coupling measurement and display. Used to estimate the influence of two earth resistance systems that are not connected to each other.
The Good:


The Bad:


The Bottom Line:

Full Review


  • 3-Point Fall-of-Potential measurement
  • 3-Point earth coupling measurement
  • Manual or automatic frequency scan from 40 to 513Hz for test accuracy in electrically noisy environments
  • Earth coupling testing
  • Selectable test voltage 16 or 32V up to 250mA test current
  • 4-Point soil resistivity measurement with automatic calculation of Rho and user selection of Wenner or Schlumberger test method
  • 2- and 4-Wire DC resistance measurement (Bond testing) with automatic polarity reversal
  • Ground Resistance with 2 clamps (no auxiliary rods)
  • Ground Resistance of Pylons with the AEMC 6474 GroundFlex Adapter and GroundFlex sensors allow the system to measure leakage current and ground resistance of tower legs without disconnecting the overhead ground conductor.
  • Includes DataView software for data storage, real-time display, analysis, report generation and system configuration
  • Auto-off power management
  • Automatic recognition of all electrode connections and their resistance value
  • Stores up to 512 complete test results in internal memory
  • Optically isolated USB communication
  • Rechargeable NiMH batteries from wall charger or vehicle power
  • Rugged dustproof and rainproof field
The DataView data logger software configures and control the power analysis tests of your AEMC Ground Resistance Tester from you PC-based computer.

DataView Features
    •    Display and Analyze Real-Time Data on PC
    •    Record Real-Time to PC
    •    Configure all Data Logger Functions and Parameters
    •    Display Waveforms, Trend Graphs, Harmonics (AC Models) and Text Summaries All Real-Time
    •    Print Custom and Standard Reports and Templates


Requirements:
  • Windows XP / Windows Vista / Windows 7 (32/64 bit)
  • 256MB of RAM for Windows XP
  • 1GB of RAM for Windows Vista & Windows 7 (32 bit)
  • 2GB of RAM for Windows Vista & Windows 7 (64 bit)
  • 80MB of hard disk space (200MB recommended )
  • CD-ROM drive



Product brochures

AEMC 6472 Product Datasheet

Product manuals

AEMC DataView Software Product Datasheet
No user reviews available.
Want to Purchase Everything Together? Kits and Bundles below:

Recommended Accessories
The AEMC 6472 Multi-Function Ground Resistance Tester has 10 recommended accessories.        Click to show all accessories


Cases
Name Price Quantity
AEMC Bag - Replacement Carrying Bag $48.00
Communications
Name Price Quantity
AEMC Optical USB Cable - Replacement $47.50
Current Probes
Name Price Quantity
AEMC MN82 AC Current Probe $299.00
AEMC SR182 AC Current Probe $369.00
Ground Testing
Name Price Quantity
AEMC Test Kit for 4-Point Testing w/ 500 ft. leads $649.00
AEMC Test Kit for 3-Point Testing $449.00
AEMC 2130.60 Tape Measure 100 ft $34.95
AEMC Calibration Checker 25 Ohm $54.95
AEMC Test Kit for 4-Point Testing w/ 300 ft. leads $549.00
AEMC Test Kit for 3-Point Test (supplemental for 4-Point Testing) $249.00

Have a Question?

Do you have a question for us? Can't find what you're looking for? We're glad to help you. Fill out the simple form below and we'll get back to you as soon as possible.

Name
Email
Phone
Message
In order to prevent spam through the form, please enter the passcode word displayed below. If you cannot read the word clearly, you can change the passcode image.

Enter Passcode: