The AEMC L101 Simple Logger II is a one channel recording device powered by an alkaline battery pack. Line tracking is performed such that 64 samples over one line cycle are taken. Frequency tracking is performed over the range of ±2Hz around the nominal line frequency (50 or 60Hz). Harmonic measurements are calculated from these 64 samples (Harmonics are only available from the Simple Logger® II Control Panel within the DataView® software).
The Simple Logger II records TRMS at a rate of up to eight times per second. The measurement process is performed no more than eight times per second. TRMS calculations are performed on a single line cycle. This means that the input(s) are ignored between measurement intervals.
The main advantage of the logger is its ability to perform a variety of recording tasks with easy and intuitive setup from a computer using DataView® software. Analog information on the input is sampled and converted to a digital signal. This digital signal is processed and stored along with scale and time information. An optically isolated Universal Serial Bus (USB) port provides for the transfer of data from the instrument’s internal memory to the computer for analysis.
Applications
Load profiling
Fault current detection
Intermittent problem detection
Demand recording
Neutral current monitoring
Harmonic current recording using DataView® software
The experience of making the internet purchase was excellent. Your website is easy to navigate, checkout was simple, and delivery of the device was quick. As well, customer service (specifically your response to my email) is great!
Ordering Information
To order click the buy now button next to the model that you wish to purchase.
See the AEMC L101 Datalogger Brochure
