Home » AEMC L630 Thermocouple Logger
AEMC L630 Thermocouple Logger
Sorry, this product is discontinued and is no longer available for purchase. Please call 1-877-766-5412 to find a suitable replacement.AEMC L642 Thermocouple Logger is a suggested replacement model.
The Simple Logger® Model L630 is a single
channel, low cost data logger that requires no user setup. It has the ability to
automatically adjust both its scale range and its sample rate to optimize the
recording session. The Model L630's measurement range is -325 to 660°F (-200 to +350°C) using a T type thermocouple.
The Simple Logger includes a Windows based software package that can plot, analyze recorded data and print graphs and data listings.
Simple Logger operates in three modes: Logging, Standby, and off. A red LED indicates the mode of operation. In the Logging mode, the logger records information in memory; in the Standby mode, it retains the recorded information for transfer to a computer; in the Off mode, the memory is cleared. However, if the Simple Logger is turned off by mistake, the cleared data can be easily recovered.
The main advantage of the Simple Logger is its ability to perform a wide variety of recording tasks with high resolution and accuracy without the need for user setup. It achieves this my means of automatic scaling and Time Extension Recording (TXR) along with a flexible input design.
Simple Logger is the easiest to use tool built to record data on-site and download it onto your computer for analysis. For the user who is monitoring a machine load or voltage line, trouble shooting HVAC, profiling a process loop or monitoring temperature, it's the perfect tool to give you the information you need, when you need it. Simply connect the logger to the signal to be recorded and press the button to begin recording. When the session is complete press the button to stop.
The Simple Logger includes a Windows based software package that can plot, analyze recorded data and print graphs and data listings.
Simple Logger operates in three modes: Logging, Standby, and off. A red LED indicates the mode of operation. In the Logging mode, the logger records information in memory; in the Standby mode, it retains the recorded information for transfer to a computer; in the Off mode, the memory is cleared. However, if the Simple Logger is turned off by mistake, the cleared data can be easily recovered.
The main advantage of the Simple Logger is its ability to perform a wide variety of recording tasks with high resolution and accuracy without the need for user setup. It achieves this my means of automatic scaling and Time Extension Recording (TXR) along with a flexible input design.
Simple Logger is the easiest to use tool built to record data on-site and download it onto your computer for analysis. For the user who is monitoring a machine load or voltage line, trouble shooting HVAC, profiling a process loop or monitoring temperature, it's the perfect tool to give you the information you need, when you need it. Simply connect the logger to the signal to be recorded and press the button to begin recording. When the session is complete press the button to stop.
The Good:
The Bad:
The Bottom Line:
The Bad:
The Bottom Line:
Full Review
Features
- Thermocouple Type T, -325° to +660°F (-200° to +350°C)
- Inputs via color-coded miniature thermocouple jacks
- RS-232 output
- One button operation
- Process control monitoring
- Wave soldering
- Refrigeration monitoring
Electrical:
Number of Channels: 1
Measurement Range: Type T: -325° to +660° F (-200° to +350° C)
Input: J, K or Thermocouple
Input Connection: Miniature color coded thermocouple jacks.
Resolution: 12 bit Better than .5° C
Accuracy: 0.5%R + T/C Accuracy
Sample Rate: 4096/hr maximum
Storage Technique: Time Extension Recording (TXR)
Data Storage: 8192 readings
Power: 9V Alkaline battery
Battery Life: 1 year for continuous recording @ 25°C
Output: RS-232 via DB9 connector
Indicators: Red LED flashes one every 2 seconds in STANDBY mode, twice every 2 seconds in LOGGING mode, and is off in OFF mode.
Controls: One membrane switch used to start and stop recording sessions and to turn the data logger on and off.
Mechanical:
Size: 2-7/8 x 2-5/16 x 1-5/8" (73.0 x 58.75 x 41.27mm)
Weight: 5 oz (140kg)
Mounting: Base plate mounting holes or Velcro pads supplied loose
Environmental:
Operating Temperature: -4 + 158°F (-20 to +70°C)
Storage Temperature: -4 to + 174°F (-20 to +80°C)
Relative Humidity: 5 to 95% non-condensing
Safety: IEC 1010, 30V, CAT. III
Number of Channels: 1
Measurement Range: Type T: -325° to +660° F (-200° to +350° C)
Input: J, K or Thermocouple
Input Connection: Miniature color coded thermocouple jacks.
Resolution: 12 bit Better than .5° C
Accuracy: 0.5%R + T/C Accuracy
Sample Rate: 4096/hr maximum
Storage Technique: Time Extension Recording (TXR)
Data Storage: 8192 readings
Power: 9V Alkaline battery
Battery Life: 1 year for continuous recording @ 25°C
Output: RS-232 via DB9 connector
Indicators: Red LED flashes one every 2 seconds in STANDBY mode, twice every 2 seconds in LOGGING mode, and is off in OFF mode.
Controls: One membrane switch used to start and stop recording sessions and to turn the data logger on and off.
Mechanical:
Size: 2-7/8 x 2-5/16 x 1-5/8" (73.0 x 58.75 x 41.27mm)
Weight: 5 oz (140kg)
Mounting: Base plate mounting holes or Velcro pads supplied loose
Environmental:
Operating Temperature: -4 + 158°F (-20 to +70°C)
Storage Temperature: -4 to + 174°F (-20 to +80°C)
Relative Humidity: 5 to 95% non-condensing
Safety: IEC 1010, 30V, CAT. III
Simple Logger® Software
Simple Logger® Software has the ability to plot graphs and view statistics quickly and easily when you download data from Simple Logger® to your computer. Scale and time axis update automatically.
With Simple Logger® Software, click and drag your mouse to zoom up the desired area of the graph for better viewing. The Min, Max and Average statistics at the bottom of the graph update automatically with zoom window.
Just click the Annotate button to add a title and descriptive information to your graph. This information can be stored and printed with a graph.
Features:
Simple Logger® Software has the ability to plot graphs and view statistics quickly and easily when you download data from Simple Logger® to your computer. Scale and time axis update automatically.
With Simple Logger® Software, click and drag your mouse to zoom up the desired area of the graph for better viewing. The Min, Max and Average statistics at the bottom of the graph update automatically with zoom window.
Just click the Annotate button to add a title and descriptive information to your graph. This information can be stored and printed with a graph.
Features:
- Very easy to set up and use - no programming required
- Statistics appear on screen: Max, Min, Avg, Date and Time
- On-line display of data logger values
- Zoom capability with automatic statistics update
- User keyed text annotations
- Automatically displays values at the cursor position
- Export dat to spreadshet and database software
- Print both graphs and tabular listings
- Paste graphs into other applications
- Programmable scale and units for all DC loggers. Automatic selection for AC loggers
- Automatic baud rate selection
- 386 or higher
- 4 MB of RAM
- Windows 3.1, Windows 95 or Windows 98
- 1 serial port not in use by any other device
- 100kB hard drive space for program and 200kB max per file stored
No user reviews available.
