Home » AEMC 5600 Digital Micro-Ohmmeter 10A
AEMC 5600 Digital Micro-Ohmmeter 10A
compensates for the effect of DC voltage interference on the accuracy and permits reading averaging. A built-in circuit filters against AC signals.
The large, easy-to-read LCD is 0.71" (18mm) high and directly displays resistance measurements in ohms with an automatic decimal point. The LCD also displays a “1” to indicate range overload, and "--" to show a reversed connection of the measurement leads. Power is supplied by a long-life NiCD battery with a built-in recharger (110/220V).
The AEMC 5600 features automatic shutoff after four minutes of non-use. Four LEDs on the front panel indicate measurement faults (open circuit, blown fuse, etc.), thermal protection, low battery and battery recharging. For operator safety and instrument protection, the AEMC 5600 is fuse protected at the inputs. Two fuses, accessible on the front panel, protect against stored energy in inductive loads. Enhanced internal circuitry gives protection against possible inductive kickback when the current is shut off. A built-in thermal switch prevents the micro-ohmmeter against overheating on the 10A range when in continuous use.
The AEMC 5600 Digital Micro-Ohmmeter is housed in a sealed, safety yellow field case with carrying handle and a lid that may be removed during testing if desired.
Applications:
- Contact resistance of breakers and switches
- Wire to terminal connections
- Winding resistance of motors and transformers
- Resistance on electric motors
- Aircraft and rail bonds
- Grounding connections
- Battery strap measurements
For greater capabilities look at the AEMC 6250 Micro-Ohmeter
Toll Free: 1-877-766-5412
What's Included:
- 110V battery
- AC supply cord
- And user manual
The Bad:
The Bottom Line:
Full Review
- Four terminal Kelvin resistance measurement
- 10A test current
- 0.25% basic accuracy
- 1µΩ resolution
- Direct reading, easy to operate
- Six selectable ranges
- Reverse polarity switch
- Overload and input fuse protection
- Automatic decimal point and zero
- Rechargeable NiCD battery (110/220V)
- Rugged field case for industrial applications
- CE Mark
|
ELECTRICAL |
|
|
|
|
|
|
|
|||
|
Range |
|
2000µΩ |
20mΩ |
200mΩ |
2000mΩ |
|
20Ω |
200Ω |
|
|
|
Display |
1999 |
19.99 |
199.9 |
1999 |
19.99 |
199.9 |
|
|||
|
Resolution
|
1µΩ |
10µΩ |
100µΩ |
1mΩ |
10mΩ |
100mΩ |
|
|||
|
Test
Current |
10A |
1A |
1A |
100mA |
10mA |
10mA |
|
|||
|
Accuracy
|
0.25%
typical 0.5% max ± 2cts |
0.25%
typical 0.5% max ± 1ct |
0.25%
typical 0.5% max ± 1ct |
0.25%
typical 0.5% max ± 1ct |
0.25%
typical 0.5% max ± 1ct |
0.25%
typical 0.5% max ± 1ct |
|
|||
|
Power
Source |
Rechargeable
6V, 7Ah NiCD battery; built-in 110V/220V (47 to 450Hz) charger; |
|||||||||
|
|
automatic shutoff after 4 minutes
non-use |
|||||||||
|
|
200µΩ range: 200 to 300 8-second
measurements 20-200mΩ ranges: 900 30-second measurements (approx.) 2000mΩ,
20-200Ω ranges: 5000 30-second measurements (approx.) |
|||||||||
|
Operating
Voltage |
4.5 to 7VDC |
|||||||||
|
Recharge
Time |
14 hours from full discharge
(approx.) |
|||||||||
|
MECHANICAL |
|
|||||||||
|
Display |
2000-count, 7-segment LED |
|||||||||
|
Connection
|
Terminals accept 4mm banana plugs
or 6mm (min) spade lugs |
|||||||||
|
Operating
Temperature |
14° to 131°F (-10° to 55°C) |
|||||||||
|
Storage
Temperature |
-4° to 131°F (-20° to 55°C) |
|||||||||
|
Dimensions
|
15.35 x 10.24 x 9.84" (390 x
260 x 250mm) |
|||||||||
|
Weight |
17 lbs 10 oz (8kg) |
|||||||||
|
Case |
Fiberglass-charged
polycarbonate with handle and removable lid, watertight to IP534 (lid
closed), IP520 (lid open) |
|||||||||
|
Colors |
Safety-yellow case, gray faceplate
|
|||||||||
|
SAFETY |
|
|||||||||
|
Safety
Ratings |
Electrical:
IEC 38, Supply voltage, Electromagnetic: IEC 801-2, Electrostatic discharge; |
|||||||||
|
|
EN 61010,
300V, Cat. II, IEC 801-3, Electromagnetic fields; IEC 801-5, Electrical
shocks, |
|||||||||
|
|
Mechanical/environmental:
IEC 529, Protection Index (IP); IEC 68.2.6, Vibration; |
|||||||||
|
|
IEC 68.2.27, Shocks; IEC 68-2-29,
Shake IEC 68.2.31, Knock over; |
|||||||||
|
|
IEC 68.2.32, Drop test, Case
Material: UL94 |
|||||||||
|
Overload
Input Protection |
380Vrms |
|||||||||
|
Fuses |
Two high-interrupting capacity 8A
380V, 11/4 x 1/4" |
|||||||||
|
CE Mark |
Yes |
|||||||||
