Home » AEMC 275HVD Non-Contact Voltage Detector
AEMC 275HVD Non-Contact Voltage Detector
Part Number:
AEMC 275HVD
In Stock?
Stock may be available
please call (877)766-5412 to confirm
please call (877)766-5412 to confirm
Quantity
Price:
$359.00 
USD (change)
USD (change) 
The AEMC 275HD Non-Contact High Voltage Detector is a high voltage detector by proximity. It is a product designed to warn the use of the presense of voltage in a particular work site.
An eight position rotary switch selects the detection range. The AEMC 275HVD uses an internal sensor designed to detect the radiated electrical field (V/m) present in energized conductors. The radiated electrical field increase with the line voltage but decrease with distance and/or shielding. When an electrical field is detected, a sound annuciator (high pitch-high powered buzzer) and visual indicators (bright LEDs) are triggered ON, warning the operator of live conductors.
The AEMC 275HVD is powered by three standard Alkaline C cell batteries and can be used both in- and out-of-doors. A universal spline on the back-end facilitates attachment to any standard hot stick. A self-test position ensures that all circuitry and annunciators are working properly before use.
Applications:
We currently have a large inventory of AEMC 275HVDs in stock and ready to ship. Place your order online or call us toll free on 1-877-766-5412 (North America) or 403-256-3636.
What's Included:
An eight position rotary switch selects the detection range. The AEMC 275HVD uses an internal sensor designed to detect the radiated electrical field (V/m) present in energized conductors. The radiated electrical field increase with the line voltage but decrease with distance and/or shielding. When an electrical field is detected, a sound annuciator (high pitch-high powered buzzer) and visual indicators (bright LEDs) are triggered ON, warning the operator of live conductors.
The AEMC 275HVD is powered by three standard Alkaline C cell batteries and can be used both in- and out-of-doors. A universal spline on the back-end facilitates attachment to any standard hot stick. A self-test position ensures that all circuitry and annunciators are working properly before use.
Applications:
- Non-contact detection of live voltages
- Check and detect live high voltage cables
- Find faults in cables
- Check grounding equipment
- Service neon lighting
- Trace live wires
- Check high frequency radiation
- Detect residual or induced voltages
We currently have a large inventory of AEMC 275HVDs in stock and ready to ship. Place your order online or call us toll free on 1-877-766-5412 (North America) or 403-256-3636.
What's Included:
- Three C cell batteries
- Padded carrying case
- And user manual
The Good:
The Bad:
The Bottom Line:
The Bad:
The Bottom Line:
Full Review
- Non-contact voltage detector
- Wide range of detection; finds 80V to 275kV; one instrument fits all applications
- Eight switch selectable voltage ranges
- Lightweight, minimizes sway at the end of long hot sticks
- Audible and visual indication of live voltage
- Self-test position ensures that all system functions and indicators are working properly by energizing the complete system
- Designed for use with hot sticks incorporating a universal spline adaptor
- Powered by three standard Alkaline C cell batteries
ELECTRICAL
MECHANICAL
ENVIRONMENTAL
| Detection Frequency: | 40 to 70Hz |
| Ranges: | 240V, 2kV, 6kV, 11kV, 22kV, 33kV, 132kV, 275kV |
| Detection: | Selection range is detected at approximately 10" (25cm)from the voltage Greater detection distances can be obtained at lower voltage positions |
| Power Source: | Three 1.5V C cell batteries |
| Low Battery Indication: | — |
MECHANICAL
| Self Test: | User selectable |
| Indicators: | Bright red LED and audible buzzer |
ENVIRONMENTAL
| Operating Temperature: | 5° to 130°F (-15° to 55°C) |
| Storage Temperature: | -4° to 150°F (-20° to 65°C) |
| Humidity: | 0 to 93% RH @ 104°F (40°C) |
No user reviews available.
