AEMC OX7102-C Portable Oscilloscope

The AEMC OX7102-C Portable Oscilloscope is the perfect tool for both laboratory and field testing.

Ease-of-use of the instrument is facilitated through 33 specialized keys for direct access to commonly used functions. Ideal for field use, the AEMC OX7102-C Portable Oscilloscope utilizes the patented new system of plug-and-play accessories, individual isolation of each of the measurement channels, a range of remote management capabilities based on an Ethernet link with web server, a number of built-in instruments, including a four channel TRMS multimeter.

The large 320 x 240 full color LCD screen provides detailed graphical and alphanumerical representations of all measurements and also functions as a touch screen. Using the convenient stylus, the various “Windows-like” menus can be opened or pulled down and executed. The stylus can also be used for direct action on graphic elements such as cursors, triggers, zooming, etc. 


Features:

• Five complementary tools in one: Oscilloscope, Multimeter, FFT Analyzer, Harmonic Analyzer and Recorder
• Sampling rate 1GS/s in one-shot mode and 25GS/s in ETS – memory depth of 2500-count per channel in “oscilloscope” mode
• Two isolated measurement channels, 600V Cat III with up to eight traces on screen
• 12-bit resolution provides deeper accurate zooming
• Real-time FFT analysis standard and calculation functions on the channels
• Two independent, 8000-count, TRMS, 45kHz, digital multimeters
• Color LCD touch screen
• 33 direct command keys and “Windows-like” menus on screen
• Multi-interface communication connector: RS-232, Centronics and Ethernet with web server
• Stylus for touch screen menu/function access and manipulating graphic elements on screen
• Probix smart probes with user definable control buttons
• NATO approved: OX 7102-C – 6625 14 549 3558
  

Applications:

• On-site contractor maintenance – industrial or electronic
• “Internal” plant maintenance
• Installations and start-up
• Industrial Process
• Quality control
• Research and laboratory – engineers or technicians

What's Included:

Included: Power adapter, Battery pack, 2-10:1 probes, 2-BNC adapters, 1-banana plug adapter, Aluminum attaché case, Cross over Ethernet cable, RS232 cable and 1 set red/black test leads

Full Review

Screen Specifications: Color 5.7” LCD (115 x 86mm) 320 x 240 — CCFL backlighting
Display Mode Vectors with interpolation — 500 samples on screen
No. of Traces on Screen Four traces and four references — Split screen and full screen modes (tracing zone 110 x 74)
Front Panel Control 32 direct shortcuts
Screen Control Touch screen — “Windows-like” menus and graphic commands
Languages Five complete languages, menus and on-line help (English, French, German, Spanish, Italian)

VERTICAL
Bandwidth - 100MHz
Channels - Two isolated channels
Input Impedance 1M½ ± 0.5% approx. 17pF
Maximum Permanent Input Voltage 600V Cat. III — Derating -20dB/decade from 100kHz
Vertical Sensibility 16 ranges from 2.5mV to 200V/div
Accuracy ±1.5%
Vertical Zoom x5 maximum
Probe Factors 1 / 10 / 100 / 1 000 or scaling to any value — Definition of the measurement unit

HORIZONTAL
Time Base Speed 35 ranges from 1ns/div to 200s/div
Accuracy ±1.5%
Horizontal Zoom x10 maximum

TRIGGERING
Mode Auto, trigger, single, Auto 50%
Source CH1, CH4
Type Front, pulse or delay (40ns/20s), count (2/16384) or TV (525 or 625 lines)
Coupling AC, DC, HFR, LFR, noise reduction — Hold-off adjustable from 40ns to 1s
Sensitivity 0.6 div to 1KHz / 1.5 div to 150MHz

DIGITAL MEMORY
Maximum Sampling Speed 25GS/s in ETS - 1GS/s in one-shot (on each channel)
Vertical Resolution 12 bits
Memory Capacity per Channel “TRC” approx. 10kB, “TXT” approx. 20kB
User Memory 1MB
Other Modes Envelope mode (Factors from 2 to 64)
XY Mode Between two from the four traces — math functions and cursors

OTHER FUNCTIONS
Autoset Complete autoset at less than 3s, with recognition of channels — Frequency > 30Hz
FFT Analyzer and Math Functions FFT, + , - , x , / - Editor of mathematical functions
Cursors Two or three cursors : V and T simultaneous or Phase Resolution 12-bit, display four digits
Automatic Measurements 18 level or time measurements, phase measurements — Resolution 12-bit, display four digits

MULTIMETER
AC, DC, AC + DC voltage From 400.0mV to 600VRMS or 800Vdc - Accuracy Vdc 0.5 % R+ 5D — bandwidth 45kHz
Resistance 80.00 to 32.00M - Precision 0.5 % R+ 25D — Rapid 10-ms continuity test
Other Measurements Capacities 5.000nF to 5.000mF/Frequency 45kHz — Diode test 3.3V

GENERAL SPECIFICATIONS
Configurations Memories Unlimited — “.CFG” file size approx. 1kB
Ethernet Network Printing (standard) 11 black and white or color drivers : IBM Proprinter, Epson ESC/P, Canon HP PCL, Seiko DPU411,
RS-232 or Centronics (options) Postscript Image files: “.BMP” 10kB, “.GIF” approx. 5kB (storage in memory transfer by RS-232 or Ethernet)
Communication Local via Ethernet 10 MB or RS 232 (option) — Remote via 10 MB Ethernet and web server included
“SX-METRO” application software for PC (option)
Power Source 9.6V/3.8 A/h battery pack — Approx. 4h between charges — Adjustable power-saving switching
Multi-voltage 98-254V / 47-63Hz — Fast charge in two hours (oscilloscope off)
Dimensions 10.25 x 7.25 x 2” (261 x 185 x 53mm)
Weight 4.2 lbs (1.9kg) with batteries

The Ethernet interface and its web server offer new ways of working and communicating, local or remote, with a convenience and effectiveness that will quickly make them necessities.  All that is needed for communication is that the other equipment (printer, PC, etc.) has an IP address. Thus, even on the road, you can print results on a network printer, exchange files between the OX 7100 series oscilloscopes and a computer.  You can also monitor the instrument remotely from any PC, display the traces in real-time and control it using the instrument panel. Whether locally or at a distance, these transfer and exchange operations are simple and rapid and do not require special software on the computer, thanks to the web server.




Real-time display of all active channels by using
SX METRO software supplied














Snapshot display of multiple waveforms and FFT data using
SX METRO software













In the oscilloscope, multimeter,
analyzer and recorder modes, the web server ensures unparalleled effectiveness, very simply, with no need to install software on the local or remote PC.

Product brochures

Product manuals

No user reviews available.