Home » AEMC 1060 1000V Megohmmeter
AEMC 1060 1000V Megohmmeter
Part Number:
AEMC 1060
In Stock?
Stock may be available
please call (877)766-5412 to confirm
please call (877)766-5412 to confirm
Quantity
Price:
$1899.00 
USD (change)
USD (change) 
The AEMC 1060 1000V Megohmmeter is an innovative professional 1000V Digital/Analog insulation testers. Designed to facilitate testing quickly and accurately by incorporating automatic measurement features and user friendly functions.
Measurements are displayed on a large dual-display LCD with bargraph for quick viewing of changes or trends. Resistance readings are displayed on the larger display, and a smaller display is used for test voltage at the sample, test run times (mm:ss), or alarm set points – all accessible at the press of a button. A family of visual indicators for safety and information also compliments the displays. A bright blue electroluminescent backlight makes for clear readings in dark areas.
The AEMC 1060 1000V Megohmmeter automatically provides the DAR and PI ratios directly on the display. User defined PI time intervals may also be programmed. The user may even select DAR or PI functions before the test, and the megohmmeter will stop at the appropriate time and display the results. Test run times from 1 second to 59 minutes are also directly programmable. The tested sample Capacitance is available at the end of each insulation resistance test.
For specific applications and operator or equipment safety, test voltages may be disabled to avoid any errors. An automatic test inhibitor prevents testing on live circuits above 25V. Discharge test voltage may be displayed at the completion of each test. A memory feature permits storing, recalling and displaying of resistance values taken at user specified intervals during a test.
The AEMC 1060 1000V Megohmmeter also has an RS-232 interface and a more extensive memory function, which permits the storage of results in files specific to the device under test. Additionally, it also has a built-in document function, which prints out a preformatted report on a serial or parallel printer. A standard software package
(DataView®) enables the user to display graphs and results for complete documentation and reporting. The AEMC 1060 Megohmmeter can also be programmed and run by a PC with this software. This enables tailored test programs, remote operation and storing of information directly into a PC.
AEMC 1060 1000V Megohmmeter is built into a double insulated field case with a detachable accessory pouch.
Applications:
What's Included:
Measurements are displayed on a large dual-display LCD with bargraph for quick viewing of changes or trends. Resistance readings are displayed on the larger display, and a smaller display is used for test voltage at the sample, test run times (mm:ss), or alarm set points – all accessible at the press of a button. A family of visual indicators for safety and information also compliments the displays. A bright blue electroluminescent backlight makes for clear readings in dark areas.
The AEMC 1060 1000V Megohmmeter automatically provides the DAR and PI ratios directly on the display. User defined PI time intervals may also be programmed. The user may even select DAR or PI functions before the test, and the megohmmeter will stop at the appropriate time and display the results. Test run times from 1 second to 59 minutes are also directly programmable. The tested sample Capacitance is available at the end of each insulation resistance test.
For specific applications and operator or equipment safety, test voltages may be disabled to avoid any errors. An automatic test inhibitor prevents testing on live circuits above 25V. Discharge test voltage may be displayed at the completion of each test. A memory feature permits storing, recalling and displaying of resistance values taken at user specified intervals during a test.
The AEMC 1060 1000V Megohmmeter also has an RS-232 interface and a more extensive memory function, which permits the storage of results in files specific to the device under test. Additionally, it also has a built-in document function, which prints out a preformatted report on a serial or parallel printer. A standard software package
(DataView®) enables the user to display graphs and results for complete documentation and reporting. The AEMC 1060 Megohmmeter can also be programmed and run by a PC with this software. This enables tailored test programs, remote operation and storing of information directly into a PC.
AEMC 1060 1000V Megohmmeter is built into a double insulated field case with a detachable accessory pouch.
Applications:
- Test insulation on cables, transformers, motors, insulators and wiring installations
- High resistance or absorption tests
- Spot reading tests
- Timed resistance measurements
- Dielectric Absorption Ratio (DAR) and Polarization Index (PI) tests
- Low insulation test range for testing old or flooded installations
- Motor insulation resistance measurements
- Continuity checks and low resistance measurements
- Computer controlled production line testing
- Predictive maintenance by storing results in PC for trend analysis
What's Included:
- Detachable accessory pouch
- One red, one blue test lead, one black shielded lead,
- Three color-coded (black, red and blue) alligator clips
- One black test probe
- One 6 ft RS-232 DB9/DB25 F/F to DB9/DB25 F/F cable
- Rechargeable battery
- DataView® Software
- US 120V power cord
- Spare fuses and user manual
The Good:
The Bad:
The Bottom Line:
The Bad:
The Bottom Line:
Full Review
- True Megohmmeter
- Test voltage combinations of 50V, 100V, 250V,500V and 1000V
- Insulation measurements to 4000GΩ (4TΩ)
- Direct measurement of DAR and PI values
- Direct measurement of sample Capacitance
- Display of test voltage and run time
- Programmable test run times and PI times
- Smooth and Alarm functions
- Automatic test inhibition (if live sample >25V)
- Automatic discharge after use with voltage display
- Large dual display with time, voltage and measurement
- Bright blue electroluminescent backlight
- Battery powered
- Auto power-down when not in use
- Remote operation with optional test probe
- Rugged dual wall field case with detachable lead/accessory pouch
- EN 61010-1, 600V Cat. III, EN 61557
- CE Mark
Additional features:
- AC rechargeable NiMH batteries – run while recharging
- RS-232 interface for direct printing of results (serial output)
- 128kB memory to store measurements in specific files
- Remote operation of megohmmeter through PC
- Includes DataView® software for data storage, real-time display, analysis and report generation
Insulation Tests
| Test Voltage | 50V / 100V / 250V / 500V / 1000V |
| Measurement Range | 2kΩ to 200GΩ / 4kΩ to 400GΩ / 10kΩ to 1000GΩ (1TΩ) / 20kΩ to 2000GΩ (2TΩ / 40kΩ to 4000GΩ (4TΩ) |
| Short Circuit Current | <6mADC |
| Accuracy | 2kΩ to 400GΩ ±5% of Reading ± 3cts 400GΩ to 4TΩ ±5% of Reading ± 10cts |
| Voltage Test/Safety Check | 0 to 1000VAC/DC |
| Voltage Warning Indicator | >25V |
| Test Inhibition | Yes >25V |
| Smooth Function | Yes |
Resistance Tests
| Measurement Range | 0.01Ω to 400kΩ |
| Test Voltage | 12.4VDC max |
| Test Current | <6mADC |
| Accuracy | ±3% of Reading ± 3cts |
Continuity Tests
| Measurement Range | 0.01 to 39.99Ω |
| Test Current | ≥200mA from 0.01 to 20.00Ω |
| Accuracy | ±3% of Reading ± 4cts |
Communication
| Memory of Reading over Time R(t) | Yes (128kB memory) |
| Report Print Out Direct to Printer | Preset format |
| Memory of Test Results in Files | 128kB memory with RS-232 |
| PC Software/Report Generation | Yes (included) |
Electrical
| Power Source | 9.6V NiMH Battery Pack 85 to 256V (50/60Hz) |
Display
| Display Size | 4 x 2 1/4" (102 x 57mm) |
| Digital Display | Two 4000-count displays |
| Analog Bargraph | 31-segments |
| Backlight | Blue Electroluminescent |
General Specifications
| Dimensions | 9.45 x 7.28 x 4.33" (240 x 185 x 110mm) |
| Weight | 7.5 lbs (3.4kg) |
Safety Reference Specifications
| Safety Ratings | EN 61010-1, 600V, Cat. III |
| Agency Approvals | CE Mark |
The DataView Software provides a convenient way to configure and control Megohmmeter tests from your computer. Through the use of two clear and easy-to-use dialog boxes, all functions of the AEMC 1060 Megohmmeter can be configured and tests can be initiated. Results can be displayed in real time and stored in your PC. Reports can be printed along with the operator’s comments and analysis.
Requirements:
.
- Print reports of all test results
- Select test voltage and run tests from your computer with a simple click and execute process
- Capture and display data in real time
- Retrieve data from the instrument’s memory
- Over 1500 insulation resistance measurements
- Over 4000 resistance measurements
- Display DAR and PI ratios
- Plot graphs of manual and timed tests
- Include your analysis in the comments section with the report
- Store a library of setups for different applications
Requirements:- Windows XP / Windows Vista / Windows 7 (32/64 bit)
- 256MB of RAM for Windows XP
- 1GB of RAM for Windows Vista & Windows 7 (32 bit)
- 2GB of RAM for Windows Vista & Windows 7 (64 bit)
- 80MB of hard disk space (200MB recommended )
- CD-ROM drive
.Product brochures
Product manuals
No user reviews available.
